background image

2

English

Safety Information

  This section presents important safety information. Always follow these instructions when using 

the product.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be 
followed to reduce the risk of fire, electric shock, and injury to 
persons, including the following:

Read all instructions before using this heater.

1. 

This heater is hot when in use. To avoid burns, do not let bare skin touch 

2. 

hot surfaces. If provided, use handles when moving this heater. Keep 
combustible materials, such as furniture, pillows, bedding, papers, clothes, 
and curtains at least 3 feet (0.9 m) from the front of the heater and keep 
them away from the sides and rear.

Extreme caution is necessary when any heater is used by or near children or 

3. 

invalids and whenever the heater is left operating and unattended.

Always unplug heater when not in use.

4. 

Do not operate any heater with a damaged cord or plug or after the heater 

5. 

malfunctions, has been dropped or damaged in any manner. Return heater 
to authorized service facility for examination, electrical or mechanical 
adjustment, or repair.

Do not use outdoors.

6. 

This heater  is NOT intended for use on tabletops or desktops, use ONLY ON 

7. 

FLOORS. It is not to be used in wet or moist locations, such as bathrooms 
and laundry areas. Never position heater where it may fall into a bathtub or 
other water container. 

Do not run cord under carpeting. Do not cover cord with throw rugs, 

8. 

runners, or similar coverings. Do not route cord under furniture or 
appliances. Arrange cord away from traffic area and where it will not be 
tripped over.

To disconnect the heater, first turn controls to the OFF position , then grip 

9. 

the plug and pull it from the wall outlet. Never pull by the cord.

 

10. Do not insert or allow foreign objects to enter any ventilation or exhaust 

opening as this may cause an electric shock or fire, or damage the heater.

 

11. To prevent a possible fire, do not block air intakes or exhaust in any manner. 

Do not use on soft surfaces, like a bed, where openings may become 
blocked.

 

12. A heater has hot and arcing or sparking parts inside. Do not use it in the 

areas where gasoline, paint, or flammable liquids are used or stored.

 

13. Use this heater only as described in this manual. Any other use not 

recommended by the manufacturer may cause fire, electric shock, or injury 
to persons.

00̲MOD-PH1401US.indb   2

00̲MOD-PH1401US.indb   2

2014/11/27   21:25:02

2014/11/27   21:25:02

Summary of Contents for T3

















Reviews: