OBID
i-
scan
®
HF
Installation
ID ISC.ANT1800/700-A/-B
FEIG ELECTRONIC GmbH
Seite 9 von 71
M00910-8e-ID-B.doc
Performance Features of the ID ISC.ANT1800/700 Antennas
The ID ISC.ANT1800/700-A antenna is a version with integrated Dynamic Antenna Tuning Board
ID ISC.DAT , Long Range Reader ID ISC.LRM2500-B, 4-times Multiplexer Module
ID ISC.ANT.MUX M4, signal light and buzzer.
Additionally, one People Counter and one radar Detector are already integrated in the antenna
ID ISC.ANT1800/700-A.
The ID ISC.ANT1800/700-B antenna is a version with integrated Dynamic Antenna Tuning Board
ID ISC.DAT and signal light mounted, only.
Up to
-
two antennas with reader and multiplexer as a single gate,
-
three to four antennas with reader and multiplexer as a double gate or triple gate
-
up to 8 antennas as multiple gate with up to 7 aisle at the use of the 8-times Multiplexer
ID ISC.ANT-MUX M8.
can be operated.
Depending on the antenna configuration, one, two or all three read orientations of the Smart Tags
and various aisle widths (gate widths) are possible.
The ID ISC.ANT1800/700-
A/B is a „figure-of-eight“ antenna with tuner and has been optimized as
transmitting and receiving antennas for the ID ISC.LRM2500 Reader. It is however also possible to
operate them with other readers at a transmission frequency of 13.56 MHz and an output
impedance of 50 . The read ranges indicated in this document and the tuning procedures may
vary.
The antennas comprise the electrical antenna conductor, the housing, the ID ISC.DAT
Dynamic
Antenna Tuner
and the connection cables
.
The antennas are tuned to the factory default to an
impedance of 50 in a magnetically neutral environment at a distance of 95 cm. When installing in
different ambient conditions the antenna can be retuned using the “DATuningTool“ PC software.
After tuning, the antennas will retain their settings as long as the ambient conditions remain
unchanged.
The antennas can be used for detecting both product and persons. It is for indoors use, only.
