GB
Safety notes
V_01/12/2010
16
Dear customer,
Thank you for placing your trust in our product!
Before using the product for the first time please make sure to read these operating instructions!
Here you will find information about how to use the product safely and ensure its long service life.
You should pay attention to all of the safety instructions in this document!
Safety notes
• The light may only be used when upward mounted inside and outside
• The user of the device must have read and understood these operating instructions prior to
its first use in order to safely implement this device.
• Always keep the operating instructions within reach.
• If you sell or pass on the device, you must also pass on these operating instructions.
• The device must only be used when it functions properly. If the device or part of the device is
defective, have it repaired by a specialist.
• When drilling into wall, ceilings or floors pay attention to cables as well as gas and water
pipes.
• The electrical connection may only be carried out by an appropriately qualified professional.
• Only use bulbs permitted by the manufacturer. The maximum bulb performance may not be
exceeded (
• Only use connection clamps permitted by the manufacturer.
• The bulb becomes hot when used! Before changing the bulb, allow to cool.
Assembly
805020, 805021
– Remove the connection housing from the lamp.
– Pierce cable seal.
– Feed the mains cable through the cable seal.
– Connect the mains cable.
– Screw the connection housing securely to the wall/ceiling.
– Screws the lamp securely to the connection housing.
– Screw the bulb into place.
Danger!
Danger to life due to electrical shock!
The electrical connection may only be carried out by an appropriately qualified pro-
fessional.
Before installation, switch off the power to the electrical network (switch off at the
main switch/fuse box).
805020_805021_805022_805023.book Seite 16 Montag, 6. Dezember 2010 2:44 14
