Use a damp cloth for cleaning of the motor part.
Parts of the appliance (see illustration on page 3)
1. Feeding lid
2. Lid
3. Glass jug
4. Gasket
5. Blade holder
6. Locking ring
7. Control panel
8. Motor part
9. On/off button
10. Function button
Use
The blender is used for blending, chopping, pureeing and mixing e.g. milk
shakes, baby food, soups and sauces. Furthermore you can crush ice for drinks
etc.
Assemble the mixer after cleaning by first putting the glass jug upside down.
Mount the gasket on the blade holder and position it in the locking ring. Next,
fasten the locking ring with the blade holder at the bottom of the glass jug by
screwing it clockwise. Make sure that the appliance has been switched off
and position the jug on the motor part in such a way that the notches of the
jug engage the grooves of the motor part. Check that the jug is positionen
horizontally and is stable.
The motor of the blender runs the blades at high speed in order to ensure
a thorough mixing. Consequently, it is important that the blender is always
placed on an even and dry surface before it is activated. Check that the jug is
positioned correctly on the motor part. If not, the blender cannot be activated.
To avoid overfilling of the jug, the amount must not exceed 1.5 litre. Use the
measurement scale on the jug to see the amount to be added. Place lid and
filling lid on the jug before you switch on the blender.
Fill the glass jug with the ingredients to be mixed and put the jug on the motor
part. Plug the appliance to a wall socket and turn the function selector to
“program”, and the signal lamps of the on/off button and the function buttons
start flashing. Choose the optional programme function by means of the
buttons ”ice crush”, ”smoothie” or ”interval”. Each function has a programmed
processing time (see more under the different functions), but the mixing could
even be finished manually by pressing the on/off button in the middle of the
function selector. The blender further comprises a stepless speed selector that
is activated by turning the function button to an optional setting min-max.
34
35
