3. Press and then press on the touchscreen panel.
4. Adjust the temperature with the and buttons on the digital
screen. The thermostat varies from 80-200°C (176°F - 392°F).
5. Then set the desired cooking time by pressing the button and
adjusting the time with the and buttons. The timer can be set
for between 0 and 60 minutes.
6. Press the Start button to launch the cooking with the selected
temperature and time settings. Cooking starts. The selected
temperature and remaining cooking time will alternate on the
screen display.
7. Excess oil from the food is collected in the bottom of the bowl.
8. Some foods require shaking halfway through the cooking time
(see ‘Cooking Guide’). To shake the food, pull the bowl out of the
appliance by the handle and shake it. Then slide the bowl back
into the appliance and press Start button again to restart cooking.
9. When you hear the timer sound, the cooking time set has finished.
Pull the bowl out of the appliance and place it on a heat-resistant
surface.
10. Check if the food is ready.
If the food is not ready yet, simply slide the bowl back into the
appliance and set the timer for a few extra minutes.
11. When the food is cooked, take out the bowl. To remove food, use
a pair of tongs to lift the food out of the bowl.
Caution:
The bowl should never be turn up side down with the
grid.
After hot air frying, the bowl, the grid and the food are very
hot. Depending on the type of food cooked in the appliance, be
careful as steam may escape from the bowl.
12. When a batch of food is ready, the appliance is instantly ready for
preparing another batch of food.
Using the grill mode
1. Place the grill plate in the bowl of the appliance.
2. Press , then press on the screen to select the Grill mode.
3. Start the Grill mode by pressing . This will launch the preheating
phase. is blinking during this preheating phase. This preheating
phase lasts 15 minutes.
4. When you hear the timer sound, the preheating phase has
finished.
5. Take the bowl out the appliance and place it on a heat-resistant
surface.
6. Place the food on the grill plate and put back the bowl into the
appliance.
7. The default cooking time is 4 minutes. Adjust the desired cooking
time by pressing and buttons (see into section ‘Cooking
Guide’ section).
8. Press the Start button to launch the cooking. The selected
temperature and remaining cooking time will alternate on the on-
screen display.
9. When you hear the timer sound, the cooking has finished. Take
the bowl out the appliance and place it on a heat-resistant
surface.
10. Check if the food is ready. If the food is not ready yet, put it back
on the appliance and set the timer for a few extra minutes.
11. When the food is cooked, take out the bowl. To remove food, use
a pair of tongs.
Caution:
After hot frying, the bowl, the grid and the food are very
hot.
Using the steam mode
1. Before use of the Steam mode, fill in the water tank to the
maximum level with water only. We recommend to use purified
water.
2. Make sure the water tank’s cap is in place and locked .
3. Put the water tank back in place.
4. Place the food in the bowl and put the bowl into the appliance.
5. Press and then press on the touchscreen panel.
6. The default cooking time is 25 minutes. Adjust the desired
cooking time by pressing and buttons (see into section
‘Cooking Guide’ section).
7. Start the Steam mode by pressing . This will launch the cooking.
The selected temperature and remaining cooking time will
alternate on the on-screen display.
8. When you hear the timer sound, the cooking has finished. Open
the appliance, take the bowl out the appliance and place it on a
heat-resistant surface.
9. Check if the food is ready. If the food is not ready yet, put it back
on the appliance and set the timer for a few extra minutes.
Note:
To cook steamed vegetables, you can directly select the
cooking program .
The temperature and cooking time will be automatically set up.
Note:
When is flashing, it indicates that water is missing in
65
64
