OBH Nordica 6620, Instruction Manual

Page: 22 / 25

Use
• Position the motor part on an even and stable surface and plug the
appliance.
• Fill the blender bottle with ingredients, maximum level is 600 ml (see the
marking on the bottle) and must not be exceeded. To get the best result
we recommend that you fill the bottle with liquid ingredients first and then
fresh/frozen ingredients (cut the ingredients in bites of maximum 2 cm in
size). Do not overfill the blender bottle.
• Screw the knife unit on the opening of the blender bottle. Next, position
the bottle with the knife unit on the motor part by aligning the arrow at the
outer side of the knife unit and the arrow on the edge of the motor unit.
The blending starts as soon as the blender bottle is pressed downwards
into the motor unit. Twist the blender bottle in the direction of the arrow,
alternatively, press it downwards until the mixing is ready. The mixing is
interrupted when you let go of the bottle or loosen the motor part. The
maximum mixing time for continuous mixing is 3 minutes, followed by a
break of 15 minutes.
This appliance is not made for mixing potatoes, cream, egg whites, dough or
similar.
Do not use the appliance for hot liquids, as the pressure at the bottom will be
too high.
If the motor stops during use, unplug and remove the blender bottle from the
motor unit. Let the appliance rest for at least 15 minutes before you switch it
on again.
Turn the blender bottle to have the knife unit facing upwards and remove
the knife unit. Screw on the delivered lid and the blender bottle is ready for
you to drink or bring along.
Cleaning and maintenance
Always unplug before cleaning and maintenance. The
blender bottle, knife holder and the lid are dishwasher
proof. Note that the knife blades are extremely sharp.
Do not use aggressive chemical detergents or other
scouring products. Remove difficult spots after a brief
soak and rub with a mild detergent and a soft brush.
Use a damp cloth for cleaning the motor part. Wipe off
all parts and put the blender bottle with the knife unit
back into the motor part. Click the lid onto the bottom
of the blender bottle.
22
23