MC 3000
Operating Manual
89
3.5.3 INFO 2
This subpage displays the program changes, whether or not auxiliary messages are
present and the base volumes for each zone. The base volume is the volume of each
zone when the patch is selected, which must be set and then saved with the edit
procedures. The volumes of the individual zones can be varied temporarily while playing
using the sliders, the volume pedal or any other controller, but are not saved, and are lost
whenever the user exits from the patch concerned and then re-selects it, or whenever the
MC 3000 is switched off. On the other hand, the volumes you assign to the zones in the
EDIT environment can be saved and recognized as base volumes, so whenever you
switch on the instrument and select that specific patch, the zones will retain the variations
in volume you have made.
Therefore, temporary variations in volume made in the program mode will never appear in
this subpage.
3.5.4 INFO 3
This subpage displays the type of control on which each of the first 3 sliders act for each
zone.
3.5.5. INFO 4.
This subpage displays the type of control on which sliders 4, 5 and 6 act for each zone.
Zone columns
Zone PG
Auxiliary
messages Y/N
Colonne delle
Zone
CC assigned to
slider 1
CC assigned to
slider 3
CC assigned to
slider 2
