MC 3000
Operating Manual
88
For the procedure for making the modifications in this page, refer to the EDIT section of
this manual, point 4.3
Press ESC twice to go back to the TOP PAGE
3.5 INFO
3.5.1 Introduction
F4, below the rectangle marked INFO, can be pressed on any program mode page to
select the last page of the mode, the INFO page. In actual fact this is a multiple page,
consisting of 5 subpages. Naturally, the first subpage which appears as soon as the INFO
page is selected is Info1. F5, under the word PAGE, can be pressed to scroll through the
successive subpages in increasing order up to 5, after which when F5 is pressed again
the system returns to INFO 1.
The name of the page (INFO) and the current mode appear at the top of all 5 subpages,
alongside the circles indicating the activation status of the current patch zones.
3.5.2 INFO 1
In this first subpage of the Info page, is reported a prospect where are shown the 8 zones
(colums from A to H) and, for each of them, is reported :
•
The activation status (ON =Active, OFF = Not active, SB = Standby)
•
The MIDI OUT port assigned to each zone
•
The MIDI channel assigned to each zone
Zone status
Assigned Port
Assigned
Channel
PAGE (F5)
Zone columns
