manualshive.com logo in svg

Oberheim GM-400, Operating Manual

Share
Download
Oberheim GM-400 Operating Manual Download Page 64

Oberheim GM 400

Digital Signal Processor

- 

130

 -

7.2 PROGRAM TABLE

This function allows the user to make a specific Program Change number sent by Midi recall
any one of the 384 memory locations available.  In other words, the user can make Program
Change n. 23 correspond to location 64 or 87 and not to location 23 as would be the case
under the conventional Midi logic.  This function is very useful when using the optional
Oberheim FC 3000 remote control unit, since it makes it possible to concentrate the recall of a
series of 10 memory locations chosen as the user wishes, which can all be reached
immediately in PROGRAM MODE by just pressing one of the number buttons on the unit (see
the foot controller user manual).  This avoids time-wasting leaps between numbers or banks
when the selection is made.

Program Change Nr parameter.  Range: 1 - 28

Allows the user to set the number of the Program Change to be used.

Location Bank parameter.  Range: A, B, C

Allows the user to select the Bank with the memory location to be associated to the Program
Change.

Location Nr parameter.  Range: 1 - 128

Allows the user to select the memory location to be associated to the Program Change.

Name.

Shows the name of the memory location currently associated to the selected Program
Change.

•

  CAUTION !!: 

To be able to use the table of Program Changes set by the user, the MIDI

UTILITY PRG function must be switched to TABLE mode (as described in the previous
point).

7.3 DUMP

The Midi Dump function allows the user to transfer the entire contents of the GM 400 memory,
or only a part of it, to a remote data storage device (computer, sequencer or data filer)
connected to the Midi Out socket. This utility thus allows the user to preserve the valuable
programming work carried out on the device. The GM 400 has a selective Dump function,
which permits selection in the tiniest detail of the exact part of the memory's contents to be
copied.

Summary of Contents for GM-400











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands