manualshive.com logo in svg

Oberheim GM-400, Operating Manual

Share
Download
Oberheim GM-400 Operating Manual Download Page 49

Oberheim GM 400

Digital Signal Processor

- 

115

 -

Note 1/2 parameter.  Range 1/4*, 1/4, 1/8*, 1/4T, 1/8, 1/16*, 1/8T, 1/16, 1/32*, 1/16T, 1/32,
1/64*, 1/32T, 1/64, 1/128*, 1/64T, 1/128, 1/128T, OFF (where * represents a dotted triplet).

Selects the musical notation to be used for creation of the delay effect.

Feedback parameter.  Range: 0 - 100

Regulates the quantity of signal returned to the input of the delay line selected thus the time
before the repetitions cease.

BPM parameter.  Range: 30 - 250

BPM indicates the number of beats per minute: in our case, they are assumed always to be
crotchets.  The parameter is used to set the delay time on the basis of the metronome speed
of the song.

Pan parameter.  Range: L = 0 - 100 - L = 100 - 0

Determines the distribution of the selected line within the stereo front.

Level parameter: Range 0 - 100

Sets the output level of the selected delay line.

Direct Level parameter.  Range: 0 - 100

Regulates the level of the direct signal.

Master parameter.  Range: 0 - 100

Regulates the level of the output signal in the context of the effects chain, in this case the sum
of the processed sound and the direct sound, mixed by means of the LEVEL parameter of the
1st and 2nd editing pages of the effect and the DIRECT LEVEL parameter.

Control of the HOLD pedal.

Summary of Contents for GM-400











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands