Oberheim GM-400, Operating Manual

Page: 13 / 74

Oberheim GM 400
Digital Signal Processor
-
79
-
•
CAUTION !!: Excessively high playing volumes may seriously damage your hearing: keep
the volume within reasonable limits .
4.2 SELECTING A MEMORIZED PATCH
Play mode indicator Foot controller General output volume
Memory bank Memory patch Patch name
Changing the memory bank.
To select a memory bank other than the one which is active:
•
Locate the flashing cursor on the memory bank indication using the CURSOR keys.
•
Turn the VALUE encoder until the required memory bank is displayed.
Changing the memory patch.
To select a memory patch other than the one which is active:
•
Locate the flashing cursor on the memory patch indication using the CURSOR keys.
•
Turn the VALUE encoder until the required memory patch is displayed.
Master level.
The MASTER LEVEL parameter controls the general output level of the selected memory
patch: the setting is memorized together with the patch itself. Note that this level is not an
absolute value but depends on the settings made during programming of the individual groups
active.
To modify the MASTER LEVEL value:
•
Use the CURSOR keys to locate the flashing cursor on the MASTER LEVEL parameter.
•
Turn the VALUE encoder until a playback volume suitable to requirements is obtained.