7
SIGNATURE (CONT.)
----------------------------------------------------------------------------
Press SIGNATURE. The current metronome click value will appear on
the display. The click value can be set to any standard note value
by pressing the arrow buttons. After you have set the desired click
value, you may exit by pressing STOP or you may continue on to the
time signature.
Press SIGNATURE once more. Now the current time signature will
appear on the display. If you press SIGNATURE once more, the
display will show the current beats per measure. You can use the
arrows to increase or decrease either the beats per measure or the
beat value (as with the click value), or you can enter the desired
value with the keypad (beats per measure only).
When the time signature is changed, the length of the sequence is
affected, so before you can exit the time signature mode you must
pass through LENGTH to set the length of the sequence.
NOTE: You can only change the time signature if the selected
sequence is empty. If the sequence contains any drum beats you will
not be able to access beats per measure or beat value.
Example 6: Setting the Metronome to Quarter Notes and the Time
Signature to 3/4
OPERATION PRESS DISPLAY READS
----------------------------- --------------- ----------------
Access Signature Mode SIGNATURE CLICK VALUE=1/08
Change Metronome to 1/4 Notes < CLICK VALUE=1/06
< CLICK VALUE=1/04
Access Time Signature SIGNATURE TIME= 4/4
Access Beat per Bar SIGNATURE BEATS/BAR: 04
Choose 3 Beats per Bar 03 BEATS/BAR: 03
Access Beat Value SIGNATURE BEAT VALUE=1/04
Exit time signature SIGNATURE LENGTH= 2 BARS
Maintain length at 2 bars SIGNATURE SELECT SEQ 00
-----------------------------------------------------------------
