7
OPERATION
OPERATION
There are two ways to adjust
the tripod for low-angle shots.
REVERSE THE CENTER COLUMN
Reversing the center column
allows for mounting the camera
upside down in order to get
close to the ground or surface.
To reverse the center column do
the following:
3. Center Column Adjustment
4. Low-Angle Setup
The sliding center column can
be used to adjust the height of
the camera. Fully extending
the center column after the legs
have been fully extended will
place the camera at the highest
position possible with this
tripod.
1. Turn the center locking knob
counterclockwise.
2. Adjust the center column to
the desired height.
3. Lock the column in place
by turning the locking knob
clockwise.
Note:
Make sure the column is
secure but do not overtighten to
avoid damaging the tripod.
