13
OPERATION
ADJUSTING THE FRICTION
(BZ-217T & BZ-226T BALLHEADS)
To adjust the friction accurately,
follow these steps:
1. Turn the locking knob and the
tension knob clockwise until
they are completely tightened.
Then mount the camera and
lens combination that you will
regularly use.
2. Once the camera is securely
mounted, hold the camera with
one hand and completely loosen
the locking knob by turning it
counterclockwise until it stops.
Then gradually loosen the
tension knob until you reach the
desired friction level.
3. Tighten the locking knob to
secure the camera in place, or
when you aren’t holding onto
the camera.
