Adjusting the Backrest
Fitting and Removing the Bumper Bar
To recline the backrest, press the button on the toggle and pull away from the seat to the
desired height (fig.36). Lower the seat to rest on the toggle (fig.37).
To put upright, grip the sides of the toggle with one hand, and the strap with the other
hand and slide the toggle up the strap to the desired height (fig.38).
To fit the bumper bar, slide the locating pin into the hole in the mounts either side of the
seat unit and click into place (fig.42 & 43).
To remove the bumper bar, press the button underneath the mounts on both sides and
slide the bumper bar out (fig.44).
fig. 36
fig. 42
fig. 39
fig. 37
fig. 43
fig. 40
fig. 38
fig. 44
fig. 41
Adjusting the Calf Rest
To adjust the calf rest, press the levers underneath either side of the calf rest, slightly
lift, then adjust to the desired position (fig.39, 40 & 41).
Press
Press
Press
“Click”
10
11
www.obaby.co.uk
www.obaby.co.uk
