Fitting and Removing the Hood
Adjusting the Hood
To fit the hood, place the hood on the chassis inline with the seat unit. Clip the hood
catches onto each side of the chassis (fig.24 & 25).
To remove the hood, lift the hood catches on both sides (fig.26).
fig. 24
fig. 27
fig. 25
fig. 28
fig. 26
fig. 29
To fold the hood, pull the hood adjusters up on both sides of the hood, as shown above.
To fasten the harness, insert both fasteners on the waist strap through the loop on the
chest strap (fig.30) and secure into the clasp on the crotch strap (fig.31 & 32).
To release the harness, squeeze each of the clips in the centre of the harness and pull
away from the clasp, one at a time (fig.33).
Adjust the harness length using the buckles on each strap (fig.34).
‘D’ Ring
The ‘D’ rings highlighted are provided for fitting a separate harness complying with BS
6684 (fig.35).
WARNING: Ensure the harness is correctly fitted before use. The harness should
always be adjusted to fit correctly. Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist strap.
fig. 30
fig. 33
fig. 31
fig. 34
fig. 32
fig. 35
Using the Harness
Press
Press
Lift
Waist
Strap
Crotch
Strap
Chest
Strap
Clasp
8
9
www.obaby.co.uk
www.obaby.co.uk
