Fitting the Car Seat on the chassis
To put the car seat onto the chassis, first fully recline the backrest on the stroller
(see page 7).
Then fit the car seat adaptors to the chassis, ensure the release levers are towards
the front wheels and locate the securing lever over the peg on the chassis (see arrow)
(fig.76). Clip into place with the lever (fig.77).
Lower the car seat onto the adaptors (fig.78), ensure it clicks into place on both sides
(fig.79).
To remove the car seat from the chassis, either press the release buttons on either side
of the car seat and lift the car seat up, away from the adaptors (fig.80-81), or remove
the car seat adaptors from the chassis (fig.77) and lift the car seat and adaptors up,
away from the chassis.
fig. 76
fig. 79
fig. 77
fig. 80
fig. 78
fig. 81
“Click”
“Click”
Lift
Lower
WARNING:
Ensure that all locking devices are engaged before use
23
22
www.obaby.co.uk
www.obaby.co.uk
Summary of Contents for zeal
Page 13: ......