OBaby zeal, Instructions Manual

Page: 10 / 13

fig. 61
fig. 64
fig. 67
fig. 70
fig. 62
fig. 65
fig. 68
fig. 71
fig. 63
fig. 66
fig. 69
fig. 72
Fitting the carrycot
Before fitting the carrycot to the chassis, first attach the wedge to the underside of the
carrycot (fig.61-63).
Then on the stroller, fully recline the backrest (see page 7) and reverse the hood
(fig.64-66). - See page 8 (fig.24 & 26) for how to fit and remove the hood.
Lower the carrycot on to the chassis (fig.67).
Secure in place by first attaching the press studs, at the foot of the carrycot to the
chassis. Feed the press studs through the slot in the seat fabric (fig.68) and attach to
the chassis in place of the seat strap press studs (fig.69).
Then secure the head of the carrycot using the straps. Feed the straps around the chassis
then clip the clasp together (fig.70). Pull the strap tight (fig.71).
fig. 73 fig. 74 fig. 75
19 18
www.obaby.co.uk
Assembling the carrycot
Using the raincover
To fit the raincover, place the raincover over the handles of the stroller and allow the
raincover to drape over the front of the stroller. (fig.73)
Secure in place using the hook and loop straps onto the front legs of the stroller
(fig.74 & 75).
WARNING: When using the raincover, regularly check your child has adequate
ventilation and is not overheating.
Unless it is raining, the raincover should be removed.