OBaby Monty, Instruction Manual

Page: 9 / 11

Removing the Car Seat from the Chassis
fig. 46 fig. 47 fig. 48
Adjusting the Car Seat Handle
The car seat handle has 3 positions:
Fig.46 - For carrying your child or fitting in the car
Fig.47 - When fitted on the stroller or for rocking your baby
Fig.48 - When used as a seat, eg. for feeding
To adjust the handle position, press the handle release button on either side of the car
seat and turn the handle to the required position, release the buttons. Check the handle
has clicked into place. Always check that the handle is locked and the harness fastened
before lifting the car seat.
fig. 43 fig. 44 fig. 45
To remove the car seat, first rotate the handle to the upright position by pressing the red
button on either side of the car seat.
Lift the release catch underneath the car seat (fig.44) and lift the car seat away from the
chassis (fig.45).
Lift
Lift
fig. 49
fig. 52
fig. 50
fig. 53
fig. 51
fig. 54
Using the Car Seat Harness
Press
1.Press
Pull
2.Lift
Crotch
Strap
Chest
Strap
Clasp
To fasten the harness, overlap the fasteners on the chest straps (fig.49) and clip into the
clasp on the crotch strap (fig.50 & 51).
To release the harness, press the button in the centre of the clasp and remove the chest
strap fastners (fig.52).
To slacken the harness, press the harness release button then lift the chest straps
(fig.53)
To tighten the harness pull on the harness strap as shown (fig.54).
WARNING: Ensure the harness is correctly fitted before use. The harness should
always be adjusted to fit correctly. Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist strap.
16
17
www.obaby.co.uk
www.obaby.co.uk