OBaby Monty, Instruction Manual

Page: 7 / 11

Fitting and Removing the Play Tray
Adjusting the Hood
fig. 25
fig. 28
fig. 26
fig. 29
fig. 27
fig. 27a
fig. 30
To adjust the hood, simply lift or lower the hood to the desired position (fig.28-30).
fig. 31
fig. 34
fig. 32
fig. 35
fig. 33
fig. 36
Using the Harness
Press
To fit the play tray, hold the play tray upright and slide
the locating pin into the receiver facing up on the chassis
(fig.25). Rotate the play tray around using the locating pin
as a pivot. Press the button underneath the play tray and
lower into position on the chassis (fig.26 & 27).
To remove the play tray, press the button underneath the
play tray and lift the tray up (fig.26). Rotate the play tray
fully around using the locating pin as a pivot (fig.27a), and
slide the play tray out.
Waist
Strap
Crotch
Strap
Chest
Strap
Clasp
To fasten the harness, insert both fasteners on the waist strap into the clasp on the
crotch strap (fig.31) and clip each chest strap onto the waist strap (fig.32 & 33).
To release the harness, press the button in the centre of the clasp and remove the waist
strap fasteners (fig.34).
Adjust the harness length using the buckles on each strap (fig.35).
‘D’ Ring
The ‘D’ rings highlighted are provided for fitting a separate harness complying with BS
6684 (fig.36).
WARNING: Ensure the harness is correctly fitted before use. The harness should
always be adjusted to fit correctly. Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist strap.
1.Press
2.Lower
12
13
www.obaby.co.uk
www.obaby.co.uk