OBaby Edge, Instruction Manual

Page: 4 / 7

Fitting and Removing the Front Wheel
fig. 13 fig. 14 fig. 15
Using the Front Swivel Wheel
To lock the swivel wheel, first ensure the front wheel is facing forward inline with the
chassis, then push the lever down (fig.16).
To put the wheels in swivel mode, lift the lever up on the front of the wheel (fig.17 & 18).
fig. 16 fig. 17 fig. 18
Adjusting the Backrest
Applying the Brakes
Lock
Release
Release
Lock
To fit the front wheel, push the wheel onto the front leg (fig.13) until it clicks into place
(fig.14).
To remove the front wheel press the buttons either side of the leg beneath the wheel and
slide the wheel away (fig.15).
To lock the brakes fully, push down on the brake lever using your foot (fig.19 & 20).
To release the brakes, lift the brake lever using your foot (fig.21).
fig. 22
fig. 19
fig. 23
fig. 20
fig. 24
fig. 21
Lift
2. Pull
1. Press
To recline the backrest, press the levers on the sides of the backrest release toggle, and
slide the toggle down the straps to the desired height (fig.22). Lower the seat to rest on
the toggle (fig.23).
To put upright, grip the top and bottom of the toggle with one hand and the strap with
the other hand, and slide the toggle up the straps to the desired height (fig. 24).
Press
“Click”
6 7
www.obaby.co.uk
www.obaby.co.uk