Fitting and Removing the Bumper
Adjusting the Hood
fig. 24
fig. 27
fig. 25
fig. 28
fig. 26
fig. 29
To adjust the hood, simply move the peak to the desired position, as shown.
fig. 30
fig. 33
fig. 31
fig. 34
fig. 32
fig. 35
Using the Harness
Press
To remove the bumper, press the buttons underneath each side of the bumper (fig.24)
and pull the bumper away from the chassis (fig.25).
To fit the bumper, simply push the stems on either side of the bumper into the receivers
on the chassis (fig.25 & 26).
Waist
Strap
Crotch
Strap
Chest
Strap
Clasp
To fasten the harness, insert both fasteners on the waist strap into the clasp on the
crotch strap (fig.30 & 31).
To release the harness, press the buttons on either side of the clasp and remove the
waist strap fastners (fig.32).
Adjust the harness length using the buckles on each strap (fig.33) and slide the waist
strap fastner along the strap (fig.34).
‘D’ Ring
The ‘D’ rings are provided for fitting a separate harness complying with BS 6684 (fig.35).
WARNING:
Ensure the harness is correctly fitted before use. The harness should
always be adjusted to fit correctly.
Children should be harnessed in at all times.
Always use the crotch strap in combination with the waist strap.
Press
8
9
www.obaby.co.uk
www.obaby.co.uk
Summary of Contents for Edge
Page 7: ......
