background image

12

This device complies with FCC radiation exposure limits for 

an uncontrolled environment. It should be installed and 

operated with a minimum distance of 20cm between the 

device and your body.

This device and its antenna(s) must not be co-located or  

operated in conjunction with any other antenna or transmitter.

This device may contain an FCC-certified transmitter 

module (CTM). The FCC ID for the module, if applicable, is 

located on the back on the bottom of the device.

Changes or modifications to the device not expressly 

approved by SmartGuard L.L.C. could void the user’s 

authority to operate the equipment.

Industry Canada Notices

This device complies with Industry Canada’s license-exempt 

RSSs. Operation of this device is subject to the following 

two conditions: (1) This device may not cause interference; 

and (2) this device must accept any interference, including 

interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’Industrie 

Canada applicables aux appareils radio exempts de 

licence. L’exploitation est autorisée aux deux conditions 

suivantes: (1) l’appareil ne doit pas produire de brouillage; 

(2) l’utilisateur de l’appareil doit acceptar tout brouillage 

radioelectrique subi, meme si le brouillage est susceptible 

d’en compromettre le fonctionnement. 

OATI/SmartGuard Support:

763-201-2020

3660 Technology Drive NE, Minneapolis, MN 55418

Summary of Contents for MyGrid Switch














Reviews: