background image

11

Federal Communications Commission 

(FCC)

Pursuant to Part 15 of the FCC Rules, this equipment 

has been tested and complies with the limits for a Class 

B digital device. These limits are designed to provide 

reasonable protection, in a residential installation, 

against harmful interference to radio communications. 

This equipment generates, uses, and can radiate radio 

frequency energy and may cause harmful interference 

to radio communications if not installed and used in 

accordance with the instructions. However, there is no 

guarantee that interference will not occur in a particular 

installation.

If this equipment causes interference to radio and 

television reception, which can be determined by turning 

the equipment off and on, the user may try to correct the 

interference with one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the distance between the equipment and the 

receiver.

•  Connect the equipment to an outlet on a different circuit 

than that to which the receiver is connected.

•  Consult the radio/television dealer or an experienced 

radio/television technician for help.

This device complies with Part 15 of the FCC Rules. 

Operation of this device is subject to the following 

two conditions: (1) This device may not cause harmful 

interference; and (2) this device must accept any received 

interference, including interference that may cause 

undesired operation.

Summary of Contents for MyGrid Switch














Reviews: