QE SERIES SINGLE-ELEMENT CARTRIDGE FILTER INSTALLATION AND OPERATION MANUAL
Page
3
of
19
1.
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
THESE OPERATING INSTRUCTIONS CONTAIN IMPORTANT INFORMATION ON THE
SAFE, PROPER, AND ECONOMICAL OPERATION OF THIS SWIMMING POOL
APPLIANCE. STRICT OBSERVATION OF THE OPERATING INSTRUCTIONS WILL
HELP TO AVOID DANGERS, REDUCE REPAIR COSTS, AND INCREASE THE
RELIABILITY AND WORKING LIFE OF THE PRODUCT.
Failure to follow the instructions in this manual may result in serious adverse health effects or even serious
or fatal injury. Failure to follow the instructions in this manual will in all cases invalidate all guarantees and
liability on the part of the manufacturer.
Consumer Information and Safety
These Cartridge Filters are designed and manufactured to provide years of safe and reliable operation.
They must be installed, operated and maintained in accordance with the information in this manual along
with any relevant local installation codes.
THIS FILTER OPERATES UNDER HIGH PRESSURE
When any part of the pool filtration system, is serviced, air
can enter the system and become pressurised. Pressurised
air can cause the Cartridge Filter top assembly to separate,
Resulting in severe injury, death, or property damage.
To avoid this potential hazard, follow these instructions:
1. If you are not familiar with your pool filtration system:
a. Do NOT attempt to adjust or service without consulting your dealer, or a qualified pool
technician.
b. Read the entire Installation & Operation Manual before attempting to use, service, or adjust
the pool filtration system.
2. Before repositioning valve(s) and before beginning the assembly, disassembly, or any other service
of the filtration system:
a. Switch off all pumps and electrical power in pool equipment to ensure the system is NOT
inadvertently started during the servicing.
b. Loosen air relief valve on top of the filter by approximately one and a half turns.
c. Wait until all pressure is relieved.
3. Whenever installing or reassembling the filter assembly, always follow the instructions and
warnings outlined in this manual exactly.
4. Once service of the filtration system is complete follow initial start-up instructions exactly.
5. Ensure that your filtration system is maintained properly. Replace any worn or damaged parts
immediately.
6. Be sure that the filter is properly mounted and positioned according with the instructions provided.
This filter must be installed by a licensed or certified service person
in accordance with any relevant local installation codes.
Improper installation could result in death or serious injury to pool
users, installers, or others and may also cause damage to property.
Always switch off all pumps and electrical power in pool equipment area before servicing the filter. Ensure
that the disconnected circuit is locked out or properly tagged so that it cannot be switched on while you
are working on the filter. Failure to do so could result in serious injury or death to a serviceman, pool user,
or others due to electric shock.
