13. Reinstall the OPC. Tape the drum shutter door open, and gently lower the
OPC into the wastebin (hold it by the gear). Insert the drum axle and
secure with the screw.
14. Reinstall the corona assembly by pushing it to the left and lowering the pins
into their respective holes.
15. Join the hopper and waste bin ensuring that the gears mesh properly.
16. Insert the small hinge pin, reconnect the left side spring, and install the right
side spring.
Figure 5
17. Replace the outer shell (right side first then the left). Next, snap the front down
and insert the four locking pins.
© 2001 Oasis Imaging Products, Inc. Any attempt to reproduce any part of these instructions without the written consent of
Oasis Imaging Products, Inc. may result in legal action. All registered trademarks are the property of their respective owners.
