background image

 

10 

ProMax MudDrain 7000/11000/14000 

 

Translation of the original Operating 
Instructions 

 

INFORMATION ABOUT THIS 
OPERATING MANUAL 

Welcome to OASE Living Water. You 
made a good choice with the purchase of 
this product 

ProMax MudDrain 

7000/11000/14000

Prior to commissioning the unit, please 
read the instructions of use carefully and 
fully familiarise yourself with the unit. En-
sure that all work on and with this unit is 
only carried out in accordance with these 
instructions. 
Adhere to the safety information for the 
correct and safe use of the unit. 
Keep these instructions in a safe place! 
Please also hand over the instructions 
when passing the unit on to a new owner. 

 

Symbols used in these instructions 

Warnings 

The warning information is categorised by 
signal words, which indicate the extent of 
the hazard. 

 

 

W A R N I N G  

 

Indicates a possibly hazardous situa-
tion. 

 

Non-observance may lead to death or 
serious injuries. 

 

 

N O T E  

Indicates information intended to give the 
user a better understanding. 

 

Additional information 

 A  Reference to a figure, e.g. Fig. A. 

 

Reference to another section. 

 

PRODUCT DESCRIPTION 

Overview 

 

A ProMax Mud Drain 

7000/11000/14000 

1 Handle, 

adjustable 

2 Pump 

base 

3 Float 

switch 

Connection, pressure side, G1½ 

Power connection cable 

Stepped hose adapter 

 
 

Intended use 

ProMax MudDrain 7000/11000/14000, re-
ferred to in the following as "unit", may 
only be used as specified in the following: 

 

For pumping clear water or rain water. 

 

For pumping dirty water and max. 
30

mm large particles. 

 

For irrigating and watering. 

 

For transferring water from and draining 
basins such as swimming pools. 

 

Extraction of water from a well. 
–  Only for irrigation and watering pur-

poses! 

 

For pumping the water out of water 
butts/rain barrels or cisterns. 

 

Operation under observance of the 
technical data. 

 

Possible incorrect use 

The following restrictions apply to the unit: 

 

Not suitable for salt water. 

 

Not suitable for drinking water. 

 

Do not use for long-term operation (e.g. 
continuous recirculation of the water in 
a pond). 

 

Do not use for commercial or industrial 
purposes. 

 

Do not use in conjunction with chemi-
cals, foodstuff, easily flammable or ex-
plosive substances. 

 

Do not connect to the drinking water 
supply. 

Summary of Contents for promax cleardrain 14000











Reviews: