4
- English -
Installation
WARNING
Risk of electric shock. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded,
grounding-type receptacle.
Attention!
Do not exceed the voltage shown on the transformer.
To reduce the risk of fire or injury, keep lamp away from materials that may burn.
Wall or ground installation
Important:
●
For installation above water: Ensure a safety distance of at
least 1.7 ft (50 cm) from combustible material. Fire
hazard: Do not cover the unit!
1.
The base foot can either be placed on the ground or bolted
to a firm base or load bearing wall
1.
Install the transformer at least 6.6 ft (2 m) from the edge
of the pond.
○
Position the unit in such a way that it does not present a
hazard to anyone.
○ Ensure safe and stable seating. Ensure the sufficient
load carrying capacity of the wall or ground for
installation on the wall or on the base.
1.
1.
Important:
●
Do not lift the light or the transformer by its power cord.
●
Keep the cord away from high temperatures or other heat sources.
●
Use a proper power source as indicated on the transformer label.
!
Tilting the unit
1.
Turn the holding screw counterclockwise and tilt the unit as
required. To fasten in place turn the holding screw
clockwise.
Connect the unit
Attention!
Operate the unit at all times with the safety transformer UST 150 from OASE or a different power supply unit
meeting the safety requirements.
1.
