Oase Jumping Jet Rainbow Flash II DMX/02, Operating Instructions Manual

Page: 28 / 36

28
- EN -
7.4 Addressing via DMX-RDM
DMX-RDM
This unit supports the DMX protocol extension RDM. RDM (Remote Device Management) is a new, open
and bi-directional protocol standard for DMX-512 controlled units. The protocol allows to receive status
information about a unit or to change configurations on a unit. Prerequisite for this function being an RDM
compatible controller. E.g. Oase WECS 1024.
RDM (Remote Device Management) is a new, open and bi-directional protocol standard for DMX-
controlled devices. The permanently transmitted DMX data flow briefly pauses (several milliseconds), and
an RDM data package (message) is sent directly to a subscriber. The subscriber evaluates the information
in the data package and sends an answer (semi-duplex) on the same line. Targeted polling to a subscriber
via its UID (Unique ID) prevents several subscribers from answering simultaneously.
RDM parameter overview:
General parameters GET
CMD SET
CMD Description
COMMS_STATUS * * Shows general status information of the bus interface
STATUS_MESSAGES *
Used to manage status messages
STATUS_ID_DESCRIPTION *
SUPPORTED_PARAMETERS * RDM parameter overview
PARAMETER_DESCRIPTION * Description of all parameters
DEVICE_INFO * Brief overview of the most important features
PRODUCT_DETAIL_ID_LIST * Additional feature
DEVICE_MODEL_DESCRIPTION * Type designation
MANUFACTURER_LABEL * Manufacturer name
DEVICE_LABEL * * Labelling field
SOFTWARE_VERSION_LABEL * Version number of the firmware
DMX_PERSONALITY * * Operating behaviour (currently the setting cannot be changed)
DMX_START_ADDRESS * * Reading and setting the DMX start address
SENSOR_DEFINITION * Sensor information
SENSOR_VALUE * Sensor value
Sensor 1 = „Temp“, current operating temperature
Sensor 2 = „TempErrWord“, temperature error counter
Sensor 3 = „VoltageSupply“, input voltage
RECORD_SENSORS * Buffering the sensor value
IDENTIFY_DEVICE * * 0 = Normal operation,
1 = Shutter, fontaine on/out
RESET_DEVICE
* Executes a reset.
1 = Warm start / 255 = Cold start