background image

 

21 

- GB - 

 

  The power connection cables cannot be replaced. When the cable is damaged, the unit or the component needs to 

be disposed of. 

  Only operate the unit if no persons are in the water! 

  The unit, the connections and plugs are not water-proof and must not be routed or installed in water. 

  Keep the socket and power plug dry. 

 

Symbols on the unit 

The warning symbols on the unit have the following meaning: 
 

 

Risk of personal injury if used incorrectly 

Incorrect use of the unit can cause injury or damage to assets. Always read the instructions for use first. 

 

 

 

Risk of personal injury caused by a general source of danger 

Dangerous UVC radiation. Health hazard for eyes and skin caused by light flash. Only operate the UV-C 
lamp inside the housing. 

 

 

 

The symbols on the unit relating to its use have the following meaning: 
 

 

Protected against touching dangerous components. Splash water protected. 
 

 

 

 

Protect from direct sun radiation. 
 

 

 

 

Dismantle at temperatures of 0 °C and below. 
 

 
 
 

Installation 

Figure (A) 
To be taken into consideration for planning: 

  Spacing between unit and water: min. 2 m (safety spacing!). 

  Do not expose the unit to direct sun radiation. 

  Water return point. OASE recommend: Route the return hose such that the clean water is indirectly returned to the 

pond, e.g. through a water course. In this manner it will be additionally enriched with oxygen. 

  Height difference between filter lid and water return point: max. 2 m. 

Installation possibility 1: Bury close to the pond. 

Dig a hole close to the pond and place the container into the hole up to the mark (B 11).  

Installation possibility 2: Placement close to the pond. 

Place the unit close to the pond where it is flood protected (e.g. hidden behind shrubs). The ground must be firm and 
level. 

Connecting a filter pump 

A filter pump is required to operate the pressure filter (only contained as a set in the scope of delivery). Only connect to 
the pump by means of pressure hoses approved for at least 0.2 bar or the maximum pump pressure. 
Hoses with an internal diameter of 1 1/2" or 2" can be connected to the unit. 

Summary of Contents for FiltoClear 12000






















Reviews: