![background image](http://html1.mh-extra.com/html/oase/50382/50382_operating-instructions-manual_720844007.webp)
24
Installation variants
AMX0138
•
Variant (a): Pond bottom filtration only
–
With pond bottom filtration only, the water is drawn in only through the filter casing (in-
let 1).
–
Set inlet 2 to position "0".
–
Close inlet 2 with the cover cap.
•
Variant (b): Pond bottom filtration and filtration via satellite filter or skimmer
–
For pond bottom filtration, the water is drawn in via the filter casing (inlet 1). Inlet 2 draws in
water via a satellite filter or skimmer.
–
Set inlet 2 to position "1", "2" oder "3", depending on the desired flow rate (25/50/75 %).
•
Variant (c): Filtration only via satellite filter or skimmer
–
Only inlet 2 draws in water via a satellite filter or skimmer.
–
Set inlet 2 to position "4".
•
Variant (d): Dry installation of the pump
–
The pump is installed outside the pond but lower than the water level.
–
With this variant, the pump must be installed without a filter casing.
Downloaded from www.watergardeningdirect.com