Weight Limit: (patient and accessories) 400 lbs. (182 kg) Do not exceed.
The Back Rest is not designed to support the entire weight of the patient. Do not sit on the Back Rest.
Be certain that the bed is completely lowered prior to discharging an ambulatory patient. The patient may lose balance
and fall.
Do not lift bed by the top. This can damage the bed.
When lowering the bed, make sure there is nothing underneath the top that can impede motion (like stools, cabinets,
accessory parts, cleaners, etc)
Use this bed only for its intended use as described in these instructions. Do not use attachments not recommended by
the manufacturer.
Close supervision is necessary when this furnishing is used near children or disabled persons.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
1. Unplug this furnishing from the electrical outlet before cleaning.
2. Unplug from outlet before adding or removing parts.
3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Contact Oakworks Customer Service before use.
4. Keep the cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
DANGER
Risk of electric shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions in
this manual.
Electrical Shock Hazard. The power supply/control module is located under the bed seat. No user serviceable parts are
inside the control box. Refer servicing to qualified personnel. Unplug wall plug prior to contact with any cables con-
nected to the power supply.
2
IMPORTANT SAFETY INSTRUCTIONS
