This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an
electrical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective Earth
(Ground) Terminal.
This symbol, when used in this manual and on product labels, indicates that the bed
and components are a Type B Applied Part pursuant to IEC 60601-1: 2005.
This symbol, when used in documentation on this product, indicates alternating
current (AC).
This symbol, when used in documentation on this product, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
U L 2 60 1 - 1
C S A C 22 . 2 N O . 6 0 1 . 1
I E C 6 06 0 1 - 2 ( 2 00 1 - 0 9 )
CC
U S
U S
LL IISS TT EE DD
R
~
----
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
1
PRODUCT USE DESCRIPTION
The PX150 & PX200’s are emergency field beds, intended for medical purposes. The bed
allows for articulation of the head section to provide different positions for the patient. It is
indicated to be used under medical supervision in a hospital or other medical facility. The
bed is only to be moved within the patient room for cleaning or patient access. No spe-
cial training is required but a review of the following manual is important for the safety of
the operator and patient. The professional should read and understand this entire manual
before use with a patient.
SYMBOL IDENTIFICATION
CAUTION
READ AND SAVE THESE INSTRUCTIONS
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in increased emissions or
decreased immunity of the bed.
The Bed should not be used adjacent to or stacked with other equipment and that if adjacent or stacked use is necessary, the bed should be
observed to verify normal operation in the configuration in which it will be used.
The Bed is designed to be a stand-alone bed. This bed must not be modified or incorporated into any other equipment.
As with any moving mechanism there are potential pinch points around and underneath the bed. It is the responsibility
of the operator of this equipment to insure that bystanders are not in the area below or around this equipment during opera-
tion.
Proper operation of this equipment is very important for the safety of the operator, patient, and any other individuals in the
area of this equipment. Directions for use of this equipment are described in this manual. The operator should read these sections
carefully.
IMPORTANT SAFETY INSTRUCTIONS
