OAKWORKS Clodagh Leo User Manual Download Page 12

Double articulating action provides nearly limitless positioning options 

with the QuickLock Face Rest. The adjustable pad takes pressure off 

sensitive facial areas while providing superb support. The QuickLock

 

Face Rest can be used in both prone and supine positioning and folds 

out of the way when not in use. Adjustments are made easily by loos-

ening the cam locks, adjusting for height and angle and then locking 

the cam locks into that position. The table has webbing loops at the 

head of the table for a variety of uses and outlets at the other end 

that work as well for additional procedures.

3”

2”

•  Do not put excessive weight or pressure on the Face Rest. 
•  Excessive pressure can cause premature failure of the Face Rest.
•  Do not extend more than 3 inches

CAUTION

ATTACHING THE QUICKLOCK FACE REST:

When attaching the QuickLock Face Rest, just slide the frame dowels into the webbing loops or the out-

lets on the foot end, being sure to keep the 1st cam lock within 3” of the table to ensure a stable connec-

tion. The recommended length of dowel bracing against the backrest should be at least 2 inches. 
To remove the QuickLock Face Rest, just pull the frame from the webbing loops or outlets until it comes 

free. Set it safely aside or store it inside the under-table cabinet until needed.

DIRECTIONS FOR USE

QuickLock FACE REST: (ACCESSORY OPTION)

To use the face rest with your clients supine, 

rotate the face rest pad so that the thick part of 

the pad supports your client’s cervical region. 

Adjusting the height and angle of the face rest 

gives your clients perfectly comfortable support.  
The face pad is flexible so that you can bring 

the open ends together or spread them apart to 

achieve the most comfortable support for any 

size face. To avoid your client’s chin from  

hitting the spacebar, make sure the pad is narrow 

enough to support their whole face.
For appropriate cervical flexion, use the cam 

locks to adjust the downward angle of the face 

rest, making sure that the surface of the face rest 

pad at the chin is not lower than the surface of 

the table. 

TIPS FOR GREAT POSITIONING USING THE QUICKLOCK FACE REST:

9

Summary of Contents for Clodagh Leo





















Reviews: