background image

10

DIRECTIONS FOR USE

Attaching the QuickLock

 Face Rest on on Flat Top models & Flex 

Top Foot End Outlets:

When attaching the QuickLock

 Face Rest to the foot end by using the 

provided outlets, just slide the frame dowels into the outlets being sure to 
keep the 1st cam lock within 3” of the table to ensure a stable connection. 

To remove the QuickLock

 Face Rest, just pull the frame from the outlet 

until it comes free. Set it safely aside or store it inside the under-table 
cabinet until needed.

Tips for Great Positioning using the QuickLock

 Face Rest: 

  •  To use the face rest with your clients supine, rotate the face rest  
   

pad so that the thick part of the pad supports your client’s cervical  

   

region. Adjusting the height and angle of the face rest gives your  

   

clients perfectly comfortable support.  

  •  The face pad is flexible so that you can bring the open ends together  
   

or spread them apart to achieve the most comfortable support for  

   

any size face. To avoid your client’s chin from hitting the spacebar,  

   

make sure the pad is narrow enough to support their whole face.

 
  •  For appropriate cervical flexion, use the cam locks to adjust the   
   

downward angle of the face rest, making sure that the surface of  

   

the face rest pad at the chin is not lower than the surface of the table. 

 •  Accessory Option:
 QuickLock

 

Face Rest (cont.)

* U.S. Patent #5,177,823

CAUTION

Do not put excessive weight 
or pressure on the face rest. 
Excessive pressure can cause 
premature failure of the 
QuickLock

 Face Rest

Outlets

DIRECTIONS FOR USE

Summary of Contents for Celesta Gemini

























Reviews: