4. To access the control box to disconnect the hand control you must first
remove the control box mounting bracket from the underside of
the cabinet (head end) by unscrewing the four knobs that hold the
bracket in place. Brace the bottom of the control box with one hand
while loosening the knobs. Once the knobs are removed, rest the
control box carefully down on the floor. There is plenty of excess cord
stored inside the cabinet to allow the control box to sit on the floor
and to rotate the mounting plate to face you.
5. Follow the coil cord for the hand control back to the place
where it connects to the control box. Press down on the cord
connector tab and unplug the hand control.
6. Pull on the hand control’s coil cord enough to enable you to
reach the plastic cord restraint that holds the cords in place (the
black foot control cord enters the control box here as well).
Remove the plastic cord restraint by just applying a little pressure
to one side. Slide the hand control cord out of the slit in the restraint.
Discard the inoperable control.
17
TROUBLESHOOTING
• Hand Control Replacement Instr uctions
T
R
O
U
B
L
E
S
H
O
O
T
IN
G
TR OUBLESHOOTING
• Hand Control
(cont)
(back of
control box)
