Though the arm rests adjust automatically to remain parallel to the
floor in any position, there will still be times when you will need to
move an arm rest out of the way or remove them altogether. We
recommend that you raise the arm rest out of the way to allow a client to
get on or off the table. They are designed to be strong and will take a
reasonable amount of weight but they are not designed to be used to
sustain a person’s weight when getting on or off the table.
To Adjust the Arm Rest:
Before asking a client to mount or dismount from the table we recommend
that you move the arm rest out of the way. The arm rests are easy to move
and manually adjust. First position the tabletop with the backrest in the
upright position and all other section flat. Take hold of the arm rest
firmly and raise the arm rest up and out of the way with a steady swing
until the arm rest is in the highest upright position (see images below).
Hold it in place until your client has mounted (or dismounted)and then
actively move it back into the resting position where it will proceed to
move automatically with the table top.
The arm rest is now set and will adjust automatically as you position the
client for whatever procedure is needed.
There will be times when removal of the arm rests will be needed. This
feature is helpful when doing massage or helping someone get on or off
the
C
elesta
G
emini
™
. This can be done easily and storage is conveniently
located in the under-table cabinet. They are then right at hand when you
are ready to re-install.
To Remove the Arm Rest:
The arm rest frame has a notched connection to the interior of the the
table top which allows it to move automatically when the table top
changes position. (cont. on next page)
11
DIRECTIONS FOR USE
• Use & Adjustment of the
C
elesta
G
emini
™
Ar m Rests
D
IR
E
C
T
IO
N
S
F
O
R
U
S
E
DIRECTIONS FOR USE
Do not place excess
weight on the Side Arm
Rests. Do not use them in
assisting the client on and
off the
C
elesta
G
emini
™
.
Either Arm Rest can be
repositioned to allow a
client to get on and off
the
C
elesta
G
emini
™
easily.
When making adjustments
the arm rests make certain
that the client’s arms are
away from the working
mechanism.
CAUTION
Do not sit on the Arm Rests.
SIDE ARMRESTS:
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injur y to both operator
and client.
• Side Arm Rests
Adjusting the Side Arm Rest
IMPORTANT
8
