SYMBOL IDENTIFICATION
SYMBOL IDENTIFICATION
SYMBOL IDENTIFICATION
1
The O
AKWORKS
®
Fluoroscopy Table is a radiographic table intended for use with
mobile or compact stationary C-arm Fluoroscopy Systems. It is ideally suited for
pain management imaging and therapeutic procedures.
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an
electrical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual and on product labels, indicates the potential
of exposure to harmful x-rays. Be sure to read and comply with all warnings.
This symbol, when used in this manual and on product labels, indicates that the
table and components are a Type B Applied Part pursuant to IEC 601.1 and EN
60601-1: 1990.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol when used in this manual or on product labels, warns that during trans-
port there should be no stacking of containers.
This symbol, when used in this manual or on product labels, indicates that
the product should be protected from moisture. The humidity specifications for
Transport & Storage are listed on page 23.
This symbol, when used in this manual or on product labels, indicates that information is
given regarding the recommended temperature limits during transport and storing.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current (DC).
C
U S
L I S T E D
C
U S
L I S T E D
C
U S
L I S T E D
C
U S
L I S T E D
C
U S
L I S T E D
C
U S
L I S T E D
~
----
