TROUBLESHOOTING
20
TROUBLESHOOTING - CONTROL REPLACEMENT
TROUBLESHOOTING
FOOT CONTROL REPLACEMENT INSTRUCTIONS -
CFPM100 & CFPM400
Replacement of the foot control will be necessary if the foot control does not
activate the function of elevation.
To Replace the foot control, follow these steps:
1. Before proceeding, disconnect the power cord from the power outlet.
2. Disconnect strain relief on the foot control cable.
3. Disconnect foot control plug at the base of the lift column.
4. Obtain the new foot control and insert the cable plug into the shielded
cable plug until firmly seated. Reconnect strain relief.
5. Plug the power cord back into the power outlet.
6. Attempt to operate the table elevation functions from the Foot Control.
7. If the table elevation functions fail to operate, contact the Customer
Service
Department.
HAND CONTROL REPLACEMENT INSTRUCTIONS - CFPM400
Replacement of the hand control will be necessary if the hand control does not
activate the trendelenburg or lateral roll function.
To replace the hand control, follow these steps:
1. Before proceeding, disconnect the power cord from the power outlet.
2. Follow cord back to the control box.
3. Disconnect hand control plug at the control box.
4. Obtain the new hand control and insert the cable plug into the
control box until firmly seated.
5. Plug the power cord back into the power outlet.
6. Attempt to operate the table tilt functions from the hand control.
7. If the table tilt functions fail to operate, contact the
Customer Service Department.
