OPTIONAL ACCESSORIES
22
OPTIONAL ACCESSORIES
OPTIONAL ACCESSORIES
CARBON FIBER ARM BOARD
The O
AKWORKS
®
Carbon Fiber Single Arm Board conveniently slides under the
table top pad and easily supports the patient’s arm in a positionary range of 180º.
The unit can easily fold for compact storage when not in use.
To use the Carbon Fiber Single Arm Board:
Unfold the Arm Board just enough to enable it to slide under the table top pad
on the Fluoroscopy Table at a 90º angle to the side of the table. Ask the patient
to lay down on the table and position them to suit the needs of the procedure.
The weight of the patient will hold the Arm Board base in place under the table
top pad. Move the upper Arm Board to the angle you need. It will stay at that
position until you change it.
When finished, Ask the patient to raise up enough for you to move the Arm
Board base from under the table top pad. Fold it up and store it away until the
next time you need to use it.
Carbon Fiber
Arm Board
base slides
under table
top pad
Upper Arm
Board rotates
as needed
a full 180º
to 180º
Prone Position at 135º
Supine Position at 180º
IMPORTANT
CAUTION
When making adjustments
in positioning be sure to
observe all cautions and
warnings given in the manu-
al to prevent injury to both
opetator and patient.
DO NOT
place undue weight
or downward pressure on the
Carbon Fiber Arm Board. It is
a positioning device for the
arms and should not be used
as leverage to get on or off
the table. Injury can occur.
PATIENT POSITIONING STRAP
When using the tilt &
Trendelenburg feature of
the CFPM400, use of the
Patient Positioning Strap is
recommended.