Oakley RADARPACE, User Manual

Page: 14 / 21

14 | OAKLEY
RADAR PACE
USER GUIDE
CONNECTED SENSORS
•
Ensure the sensor device is not currently paired with another device.
•
Most connected sensors require movement to begin broadcasting.
RESETTING RADAR PACE
•
To perform a factory reset and reboot RADAR PACE, hold the power button for more than 12 seconds. The indicator light will
blink red.
•
To perform a factory reset and power off RADAR PACE, hold the power button for more than 18 seconds. The indicator light
will blink red.
MAINTENANCE
STORING RADAR PACE
For optional performance, fully charge RADAR PACE before storing for an extended period of time. Charging once
every two to three months during extended storage is recommended.
CHARGING
Oakley RADAR PACE comes with a specially designed Micro USB cable. Before charging RADAR PACE, always make
sure the USB ports are clean and sweat-free.
CLEANING AND MAINTENANCE
To help preserve the superior optical quality of Plutonite
®
lenses, your new Oakley eyewear comes with a woven,
microfiber cloth bag specially designed for cleaning and storage. Hand wash and air-dry the microfiber bag regularly.
Keep in the cloth or hard case in a dry place at a temperature between 14 °F (–10 °C) and 95 °F (+35 °C).
To clean your lenses and frames, use water and soap, avoiding all types of solvents or alcohol. Do not use dirty
or abrasive cloths, which could alter the features of their filters. Use care when washing and do not expose the
electronic device to water or soap. This product conforms to a water rating of IPX5, which ensures the product will
show no adverse damage even if exposed to water splashing from any direction. However, the electronic device is
not waterproof, so it should never be washed with water or immersed in water.
Use only original accessories and spare parts.
Iridium
®
Lenses: Oakley’s Iridium
®
is a thin-film reflective coating engineered to help reduce glare and improve
contrast. This coating should be treated with special care to avoid scratching. Only use Oakley’s cleaning kits/
solutions with Iridium
®
lenses.
Do not wear or clean the product while you are charging it. Always unplug the charger first before cleaning the product.
Do not use abrasive cleaners to clean your product.
Do not expose the electronic device to detergent, soap, soapy water, acidic foods, pool water, sunscreen, lotion, oil,
adhesive remover, hair dye or solvents.
Do not place the product in a dishwasher, washing machine, microwave oven, oven or dryer.
Do not expose the product to extremely high or low temperatures.
Do not go swimming with or shower with the product.
Do not expose the product to saunas, steam rooms or water at high pressure.
Do not leave the product in direct sunlight for an extended period of time.