3
OZONE GENERATOR KIT
Model No. oz-1-a
The Ozone Generator Kit is an optional system designed exclusively for use on air filtration
units. The generator, when installed and operated correctly, will assist in keeping your
filtration unit and media clean and functional without harmful chemical byproducts.
The generator works automatically during regeneration periods and requires very little
maintenance.
How it Works:
During regeneration, air filters recharge the top portion of the media tank with air. This
recharged air oxidizes contaminants in the water, allowing them to be filtered out through
the media below.
The Ozone Generator activates during the air-draw cycle of regeneration. As air is being
drawn into the tank, it passes through an electrical field created by the ozone generator
which converts normal oxygen (O
2
) to ozone (O
3
).The generated ozone is then drawn into
the tank which helps clean the unit of nuisance, slime producing bacteria. The ozone
generator will automatically turn itself off after regeneration.
While producing ozone, the unit will measure and record the electrical amperage
consumed by the generator itself. The alarm feature, if turned on (default is off), will enter
into alarm status if a low amperage situation occurs for three consecutive regenerations.
This will be indicated by an alarm and the control valve will read “Service Ozone.” This
indicates the ozone generator is not operating correctly and may need to be adjusted (See
page 9 for more information on maintenance and troubleshooting)
Applications:
The Ozone Generator kit is compatible with filtration units using the following medias:
•
Turbidex
•
Catalytic Carbon
•
Greensand Plus
•
GST/Calcite
Warning: Do not install kit on an air filtration system that utilizes birm.