AX1 LED User Manual
Rev 1.0
1.0.3 ALARM REPORT
When
alarm
occurs, the strobe lights and the bells will be turned
ON
. If the system is
disarmed
, it could only turn
OFF
the bell but not the strobe light. Zone LED fast flashes
indicate that the designated zone has been triggered by alarm.
During the state of
alarm
, only PIN entry is allowed. In other words, only
DISARM
is
allowed.
1.0.4 CLEAR ALARM MEMORY
When
alarm
occurs, the strobe lights and the bells will be turned on. If the system is
disarmed, it could only turn off the bell but not the strobe light. Thus, the user needs to clear
the alarm memory to turn
OFF
the strobe light. Besides that, once the alarm memory is
cleared, the auxiliary power supply 1 will be reset for 3 seconds before restoring it again.
9
Press and hold
[
]
for 2 sec.
Alarm
Cleared
