
Above is an example of a device that does not fit the default pins provided.
In this case, take out the original steel pin and use a screw to manually
lock the slide onto the device.
After installing rails on both sides of the device, slide it into the case.
5. Proceed to slide the rail into place until it locks. Check to
make sure the device is secure to avoid any damage during
transportation.
3.5” External Floppy Installation
1. Begin the installation process by removing the front panel
and side panel.
2. Push the plastic cover out using a tool ( ie. The handle of an
screw driver ) to avoid accident.
NZXT. 11
Summary of Contents for Lexa S
Page 1: ...LEXA User s manual NZXT 1...