
NZXT. 10
5.25” External Drive Bay Installation
1. Begin the installation process by opening the front panel. If
you do not yet have the accessory box removed, please also
open the side panel.
2. In the accessory box you will find three types of rails for
5.25” drives ( i.e. CD-ROM, etc ), floppy, and hard drives.
Attach the appropriate rail on both sides of your device. In
the case that the rail does not match your device, manually
secure the rail onto the devices with the extra screws
provided. If you find that the front panel is touching your
device, adjust the location of the steel pins on the rail to
mount the device deeper inside the case.
3. Remove the plastic cover either by pulling on the two
openings or pushing it out using a tool. ( i.e. The plastic
handle of an screw driver, etc )
4. Turn the aluminum plating in a back and forward rotation
until it is loose and remove it.
From Left to Right. 5.25”, Hard Drive, Floppy rails
Summary of Contents for Lexa S
Page 1: ...LEXA User s manual NZXT 1...