THE EDEN COLLECTION
For assembly advice or parts go www.compacfurniture.co.nz or call 0800 100 858
STEP 2
–
RH End & LH Division
•
Lay the
RH End
on a smooth clean surface with holes facing upwards.
•
Attach five
RH Drawer Slides (CR)
to the RH End using the
H4 Drawer Slide Screws
. Use the holes as indicated
in the diagram below
-
each slide requires two screws. Ensure that the end of the Slide with the wheel faces
towards the finished edge of the LH End.
•
Insert two
H2 Large Cams
as shown in diagram. Ensure the arrow on the top of the Cam points towards the top edge
of the End.
•
Push two
H15 Dowels
into the top edge of the End.
•
Screw three
H1 Connecting Bolts
into the holes indicated on the diagram below.
•
Repat this process for the RH Division.
H1
H2
H4
H15
H1 Connecting Bolt
H1 Connecting Bolt
