THE EDEN COLLECTION
For assembly advice or parts go www.compacfurniture.co.nz or call 0800 100 858
STEP 12 -
ATTACH THE DRAWER SLIDES
•
Turn the drawer upside-down as shown and attach the
Drawer Slides
(DR and DL) with the four
H6 Small Woodscrews
as shown below. Ensure that the ends of the slides without the wheels are hard up against the back of the drawer front
as shown. Each slide requires two screws.
STEP 13 -
ATTACH HANDLES AND FIT DRAWERS INTO CABINET
•
Fit the drawers into the cabinet. Start with the top drawers and work your way down.
Angle the drawer slightly to ensure that the wheel
at the back of the drawer slide goes behind the
front wheel on the cabinet slide. Then lift the
drawer up and slide it into the channel of the
drawer slide.
