THE EDEN COLLECTION
For assembly advice or parts go www.compacfurniture.co.nz or call 0800 100 858
ASSEMBLE THE UNIT
STEP 5
–
RAILS AND TOEBOARDS
Please see Parts list to distinguish the difference between the parts.
•
Lay the LH End finished side down on a clean surface that is free of anything that may damage the woodgrain
finish. A clean carpeted floor is the most ideal for this.
•
Position the Drawer Rails and Toeboard and Brace Rails over the Connecting Bolts installed in the End
–
take note of
the drawing below to get them in the correct place.
Ensure the finished surface of the Toeboard faces towards the
Front Edge of the unit so the cams cannot be seen when the unit is completed.
Make sure the Large Cams face
towards the top of the End.
•
Tighten all three Cams in a clockwise direction to lock Rails and Toeboards to the LH End. The Large Cams should
turn at least a ¼ of a turn.
Drawer Rails
