8
Filling with one filter media
1. Remove the lid by slightly turning it.
2. The separating grid included with Body 1.0
and 2.0 (part no. 5, page 17) can be removed
when only one filter media is used.
3. Add the filter media from the top. Put the lid
back on and turn it to lock position (Fig. 4).
Filling with two filter media (TORQ
®
G2 Body 1.0
and Body 2.0 only)
Hint: The media in the upper chamber can be
changed easier. We therefore recommend to
place the media with the shorter run time in the
upper chamber.
1. Turn the body upside down and remove the
grid insert.
2. Keep hold of the acrylic stick, and insert the
first filter media.
(Fig. 4)
3.
1.
