5.2 Real-time application variables monitoring
FreeMASTER enables monitoring and updating all the application global variables. In this application,
several key variables are displayed in the scope windows. These variables are divided into different blocks
as shown in the following figure.
Figure 18 Real-time application variables
•
wct_debug
This block shows the variables used for the GUI command.
•
Library
This block contains power loss variables, timing variables, coil selection variables, working
parameters, system status, DDM variables, and RX information.
•
HAL
This block contains ADC raw data and DDM buffer values.
•
NVM
This block lists all NVM parameters. Q factor sub-block shows the Q factor calibration constants.
RRQD sub-block shows the quick removal calibration constants. FOD sub-block shows the FOD
characterization calibration constants. Normalization sub-block shows the FOD normalization
constants. Analog sub-block shows the rail voltage calibration constants.
•
LIB PARAMS
This block lists all parameters used for the WCT library.
•
Command
WCT1011A/WCT1013A Automotive MP-A9 Wireless Charging Application User’s Guide, Rev. 0, 10/2017
18
NXP Semiconductors
